2gig Technologies Go Control 2GIG-CNTRL2 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 24

2gig Technologies Go Control 2GIG-CNTRL2 Скачать руководство пользователя страница 17

15

Network Maintenance

Removing Devices

When a device will no longer be used in the
home control network, it should be removed
(also called excluded) from the network so the
system will not try to communicate with the
missing device.

To remove one or more devices from the
network, use the following steps:

1.

From the Toolbox Screen, press the

REMOVE

DEVICES

button. The Control Panel will display

“Discovering devices” and wait for a signal from
a device.

2.

Press and release the program button on the
device. (This button may also be called “bind”,
“learn”, or may not be labeled.)

3.

When the device is discovered, the display will
show “A device has been removed from the
network...”.

4.

Repeat Steps 2 and 3 for any additional devices
that need to be removed from the network at
this time.

5.

Press

BACK

when fi nished.

These steps can be used at any time to remove
devices from the home control network.

Remove Z-Wave Devices Screen

Removed Devices Display

Removed device

indication

Pressing the Device’s Programming Button

PRE

SS

Z-WAVE

DEVICE BUTTON

«
...
15
16
17
18
19
...
»

Содержание Go Control 2GIG-CNTRL2

























Отзывы:

Нет отзывов