2gig Technologies 2GIG-CAM-100W, Руководство по эксплуатации

Страница: 37 / 56

Copyright© 2015 Nortek Security & Control LLC
37
Local Record
Record Policy
Record Policy is where recording parameters for the mini-SD card on the IP Camera can be defined.
Select Schedule Record to enable Time Policy. Time Policy options are 24x7H (continuous recording) or
Schedule recording. Selecting schedule recording will display the Schedule setting menu.
Select Alarm Record option to record on Video Motion events and PIR Motion events.
Select Pre-Record to select up to 30 seconds to record pre-event data depending on the bitrate selected.
Select Post-Record to record video after the event has occurred. This can range from 0 seconds to
86400 seconds (1 day).
I/O Alarm is not supported on the 2GIG 100W and 2GIG 250P
Motion Alarm option is to record motion alarm events. Ensure that Motion Detection parameters are
configured correctly.
PIR Alarm option is to record PIR alarm events. Ensure that PIR parameters are configured correctly.
Network Anomalous Alarm is to record when the Network has dropped and power is still supplied to the
IP Camera.
Record Audio option is to record audio from the IP Camera microphone onto the video stream.
Record Rule has two options: Cycle Store & Save Days. Cycle will overwrite data when the Mini-SD card
is full of video data. Save Days will record a defined number of days and will not overwrite the video
data. After the Save Days or data storage has been fulfilled, the IP Camera will stop recording.
Stream Name option allows you to select which of the three IP Camera streams to record.