2 EASY
CAMERA MODULE
Note:
Key A and key B can not be seen on the panel,they are cryptic.
Normally,
key A and key B are not activ
e
.
To activate the buttons,
just set the DIP6 to ON
position
Attention: All settings will be canceled if the
Restore Factory Setting
is
activated. Include the modules setting,
such as
Proximity
module,
Keypad modul
e
(e
ven if the modules are not connected to
the
Camera Module
)
When in standby mode
, s
hort out the
Exit Button Port(EB+,EB-)
,
then continuously toggle the DIP
-
6 switch for 4 times with a warning
sound of BP+, and the three Indicators will blink at the same time,
that means the
Restore Factory Setting
is in progress; If the three
Indicators turn off with a warning sound of BP+,it means the
Restore
Factory Setting
is finished
Please know that the DIP6 switch must be set to ON while the others
are set to OFF to carry on the following settings.
When the door station with
Camera Module
in standby
:
(1)Press Key A, the
Unlock
indicator
turns on with the warning sound
of BP+, BP;
(2)Press Key A again to set the
Unlocking Mode
to
Normally O
pen
or
Normally Closed
. (
Normally O
pen
: the
Status
indicator
blinks
ones
with the warning sound of BP+;
Normally Closed
:the
Status
indicator
blinks twice with the warning sound of BP+, BP)
If
TFT Module
is connected, the info will be displayed on screen
When the door station with
Camera Module
in standby
:
(1)Press Key A, the
Unlock
indicator
turns on with the warning sound
of BP+, BP;
(2)Press
and hold
Key B to enter the
Unlocking Time Delay Setting
, a
warning sound of BP will be heard and the
Status
indicator
blinks
one time per second
The counting of
Unlocking Time
is the times that
Status
indicator
blinks
(the units is second). For example,the
Status indicator
blinks
for four times,that means the unlocking time is 4 seconds
When the door station with
Camera Module
i
n
standby
:
(1)Press
and holld
Key A for 3 seconds to enter the
Warning T
u
ne
Option Mode
, the
Status indicator
turns on and the current tune
will be
play
ed
(2)Press Key A again to play next tune
(3)Press Key B to
exit
When the door station with
Camera Module
is standby
:
(1)Press Key B to enter
Tune Volume Setting
, the
Talk indicator
turns on
and
play
s
the tune at current volume
(2)Press Key A to increase/decrease volume
(3)Press B to exit
If
TFT Module
is connected, the current
Volume
will be displayed on
screen
(1)During conversation, press
and hold
Key B
for 3 seconds to
enter the
Talk Volume Setting
.
The
Talk indicator
turns on with the
warning sound of BP+,BP
(2)Press Key A to increase/decrease volume
(3)Press Key B to exit
•
Unlocking Mode Setting
•
Unlocking Time Delay Setting
•
Warning T
u
ne Setting
•
Tune Volume Setting
•
Talk Volume Setting
Speaker
Camera lens
Night view LED
MIC
Invisible key A
Status indicator
Talk indicator
Unlock indicator
Invisible key B
MODULES
1. Parts and functions
2. Settings via touch button
3. Restore
to
factory setting
DMR21 Technical M
a
nu
al
-5-
