2easy 17-D, Руководство по установке

Страница: 7 / 12

Use the DIP switch and PROG button to change the unlock setting.
1. Set DIP
‐
1=ON, DIP
‐
2=OFF;
2. Press the PROG (Fig 1) button and hold for 3 secs (blue LED on) to activate the setup option:
1) NO relay: press the PROG button one more time.
2) NC relay: press the PROG button and hold for 3s again.
1. Set DIP
‐
1=OFF, DIP
‐
2=ON;
2. Press the PROG (fig 1) button and hold for 3 secs (blue LED on) to activate the setup option:
3. Press the PROG (fig 1) button and hold for the number of seconds req uired (indicted by beeps and
red LED). The time between pressing and releasing the PRGO button is the unlock time.
Note : DIP
‐
1 and DIP
‐
2 should reset to the corresponding ad dress code after setting the above.
Fig. 1
1 2 3
Prog Button
CDV17DS PCB
Instructions for Lock Relay 1 Setting:
UNLOCK TYPE
UNLOCK TIME
-
6
-