2E 2E-OPS-1200, Руководство пользователя

Страница: 5 / 31

EN
4 5
Product introduction
1. Hand shank
2. 15W Wireless Charging
3. 12V Cigar lighter (Female)
4. LED On/Off Power Button
5. Main On/Off Power Button
6. Led Screen Display
7. AC On/Off Power Button
8. VDE(Europe) Socket Output (AC230V/50Hz)
9.1. DC On/Off Power Button
9.2 DC5.5*2.1 Output
10. Anderson Port for Solar Charging
11. DC7.9 Input only
12.1. USB Port / Wireless Charging ON/OFF
Button
12.2. Type-C1 Input/Output PD100W
12.3. Type-C2 Output PD100W only
13. LED Torch
1. 15W Wireless Charging
2. hand shank
3. 2*12V Cigar lighter(Female)
4. LED On/Off Power Button
5.Main On/Off Power Button
6. LED Screen Display
7. AC On/Off Power Button
8. 2*VDE(Europe) Socket Output(AC230V/50Hz)
9.1. DC On/Off Power Button
9.2. 3*DC5.5*2.1 Output
10. Anderson Port For Solar Charging
11. DC7.9 Input Only
12.1. USB Port/Wireless Charging On/Off Button
12.2. Type-C1 Input/Output PD100W
12.3. Type-C2 Output PD100W only
13. LED Torch
1.Type-C1 Input/Output, no need to do any actions, connect your device, the Power Station will be
discharged automatically.
2.Press the Light Button(4) for 3-5 seconds, the lighting will be turned on, click the light button to switch
different modes (Weak/Strong/Blink).
The following steps must be turned on the Power Station: Press Power Button(5) for 3-5 seconds
a.When the Screen is lighted on, Press the USB Power button(12.1) to turn on the Type-C2+4*USB-A+
Wireless output
b.Press the DC button (9.1, till LED for DC is lighted on), then 3*DC5.5(at the bottom of the screen) and
2*12V Car outlet (at the top of the screen) can be output.
c.Press the AC Power Button(7) for 3-5seconds,the Screen show moment Voltage 230V means AC
Socket can be output. Press AC Power Button again for 3-5seconds to cut off the AC Output(the LED
for AC was turned off).
Notice:
1.It is recommended that the loaded device should not exceed 1200W, and the excessive power may cause output protection
or burn out the product.
2.Only Anderson Port for Solar Charging
3.The Cooling Fan will be started when the total output Power >=150W(1pc), Power >=300W(2pcs)
4.USB-A QC3.0-18W have no output when DC Charging Input
5.DC input will be cut off @85% battery level when DC+PD Input same time
6.3*DC5.5 and 3*Car Outlet have no output when DC7.9 Input
7.DC Output will be cut off when AC Output reached 1000W
1. Type-C1 Input/Output, no need to do any actions, connect your
device, the Power Station will be discharged automatically.
2. Press the Light Button (4) for 3-5 seconds, the lighting will be
turned on, click the light button to switch different modes (Weak/
Strong/Blink).
3. The following steps must be turned on the Power Station: Press
Power Button (5) for 3-5 seconds
a. When the Screen is lighted on, Press the USB Power button (12.1) to
turn on the Type-C2+4*USB-A+Wireless output.
b. Press the DC button (9.1) (till LED for DC is lighted on), then
3*DC5.5(at the bottom of the screen) and 2*12V Car outlet (at the top
of the screen) can be output.
c. Press the AC Power Button (7)for 3-5seconds,the Screen show
moment Voltage 230V means AC Socket can be output. Press AC
Power Button again for 3-5seconds to cut off the AC Output(the
LED for AC was turned off).