2Box DrumIt Five, Руководство пользователя

Страница: 34 / 81

KIT-Mode
34
9.3 KIT
– ENV*
SOUND Here you can specify which zone of the selected sound will be used. Depending on the
type of sound, several zones can be controlled. For example, with cymbal sounds,
three zones (
+ Bell + Bow + Edge ) are available, with snare sounds, only two zones ( +
Fell + Rim). You change the value by pressing the left DATA button. You will be
offered all possible combinations sequentially.
Example 1: tom sound: + + = depending on where you hit the pad (head or rim) - the
respectively assigned sound is generated
Example 2: tom sound: - + = no matter where you hit the pad, always the rim sound is
generated.
Example 3: cymbal sound: + - - = the sound of the bell is always generated.
This feature is helpful if you want to trigger a cymbal on a pad and assign e.g a crash
sound on the rim of a tom pad (additional trigger channel (PERC)) and play the bell or
the ride on the head.
Loop-Sounds are an exception. When a loop is selected on the page DRUM, the
following parameters are available:
Loop The loop will be played until the pad is struck again (start / stop) - default
setting -
Loop! regardless of the velocity, the loop is always played at the maximum level
Solo The loop is played only once.
Solo! The loop is also played only once, but with maximum volume.
To avoid double-trigger, in loop mode the threshold is internally raised to -24 dB
automatically.