Model 306 Ozone Calibration Source Manual Rev. G-1
9
4.
OPERATION VIA THE LCD MENU
4.1
Menu Overview
Any time after powering the instrument on, you may enter the main menu by holding in
the rotary select switch until the menu appears. Once the menu appears, release the
select switch. (Note: You may enter the menu without waiting for the warm up to be
complete; however, the ozone concentration selected will not be accurately output
until the set point temperature is reached.)
The following diagram summarizes the complete LCD menu.
Menu
Cfg
O3
Cfg
Zer
Prg
Cal
Stp
Vout
O3_L
Sch
D/T
O3_H
Figure 4-1.
The LCD Menu of the Model 306 Ozone Calibration Source
™.
After pressing the select switch the main menu will then be displayed as:
Menu
Cfg O3 Stp Zer
Rotating the select switch will move the blinking cursor to highlight the first character
of each of the four submenus,
Cfg
,
O3
,
Stp
and
Zer
. One can enter any one of these
submenus by rotating the select switch to move the cursor over the first letter of the
submenu, and then momentarily pressing
(“clicking”) the select switch.
