247Security ZEUS Pt Скачать руководство пользователя страница 32

Страница: 32 / 71

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com

USER MANUAL,

ZEUS Pt

4.5.16

FILE ENCRYPTION PASSWORD

If file encryption is enabled (see above), this is where the password is set.

Warning

: If you enable file encryption and forget your password, you will

NOT

be able to play

back your recorded video / audio files.

4.5.17

ENABLE GPS

If this option is enabled and the GPS antenna is installed you will be collecting all the GPS

information and storing on the HDD to be uploaded at a later time via the USB GPS Stick or the WIFI

Touchdown system process in conjunction with the MiniTRACK process.

4.5.18

ENABLE Tab101

If this option is enabled and the Tab101 is installed you will be collecting all the G-Force

information and storing on the HDD to be uploaded at a later time via the USB GPS Stick or the WIFI

Touchdown system process in conjunction with the MiniTRACK process.

4.5.19

ENABLE SHOW TAB101 PEAK ON OSD

If this option is enabled and the Tab101 is installed then when there is g-force value on the

device then these value will be showed on OSD.

4.5.20

ENABLE SMART UPLOAD

This needs to be enabled for automatic upload of Marked Video Events, Requested Video, GPS

and Drive-Safe™ data via the WIFI Touchdown system.

4.5.21

ENABLE EXTERNAL WIFI

This option is only enabled for a DVR that does not include the internal WIFI connection. This

would allow for the connection of the external WIFI Bridge to work with an otherwise “non-WIFI” DVR

for use on the WIFI Touchdown system.

4.5.22

ENABLE SSD RECORDING

Содержание ZEUS Pt







































































Результаты поиска

Содержание ZEUS Pt

Отзывы:

Бренды по названию

Популярные бренды

247Security ZEUS Pt, Руководство пользователя

Результаты поиска

Содержание ZEUS Pt

Отзывы:

Бренды по названию

Популярные бренды