background image

7. Low voltage indication: normal voltage for the receiver 3.08V±0.1V and for the transmitter 
    3.08V±0.1V. If lower than this voltage, the LED indicator light will flash once every second to 
    remind you to change the batteries.
8.There is one Chime-Low-Alarm switch on the side of the receiver. It operates as follows: High 
    Volume Chime/ Low Volume Chime / Alarm.
9. Move the Chime-Low-Alarm switch to Chime or Low position the receiver will work as a chime. 
    Move the switch to Alarm position, it will work as an Alarm.
10.The receiver batteries’ lifespan: if a 1.5V C battery with capacity 7800mAh is used, based on 
    average 10 sounds per day, 80% of the battery capacity available, these three batteries can be 
    used for 20 months.
11.The PIR transmitter batteries’ lifespan: if a 1.5V AAA battery with capacity 1150mAh is used, 
    based on average 10 sounds per day, 80% of the battery capacity available, these three batteries
    can be used for 12 months.

4

1byone Products Inc.
www.1byone.com
2313 E, Philadelphia Street, Ontario, CA 91761 

Содержание O00QH-0509

Страница 1: ... 15mA Quiescent Current Receiver 400uA Quiescent Current PIRTransmitter 50uA Sensing Angle 45 Sensing Distance 5 8 m Ring Volume 100dB within 0 5 m Reception Sensitivity 85dBm Accessories List 1 x PIRTransmitter 1 x Receiver 1 x Instruction Manual 3 x Wall Plugs 3 x Screws Names for Parts 1 LED Indicator 2 Speaker 3 DC 6V Input Jack 4 Switch for Chime Low Alarm 5 On Off Switch 6 Sound and Flash Sw...

Страница 2: ...V batteries in the battery compartment according to the marks in the battery compartment 3 Replace the compartment cover and secure the screws Wall Mount Receiver and PIRTransmitter PIR Transmitter Unit Drill a hole on the wall at your required height Insert a wall plug included into the hole Then insert a screw included into the wall plug Be noted that you should not insert completely the screw i...

Страница 3: ...ns Instruction 1 Install the PIRTransmitter with three AAA alkaline batteries It turns into induction state after 10 seconds power on with induction time interval 5 seconds 2 Install the receiver with three 1 5V type C alkaline batteries or plug the receiver into DC6V 200mA power Move the On Off Switch to the ON position Maximum 50 codes can be matched and saved in the receiver within 15 seconds A...

Страница 4: ... position the receiver will work as a chime Move the switch to Alarm position it will work as an Alarm 10 The receiver batteries lifespan if a 1 5V C battery with capacity 7800mAh is used based on average 10 sounds per day 80 of the battery capacity available these three batteries can be used for 20 months 11 The PIR transmitter batteries lifespan if a 1 5V AAA battery with capacity 1150mAh is use...

Отзывы: