background image

EN

DE
FR

ES

IT

1

IMPORTANT SAFETY INSTRUCTIONS

When using this iron, basic safety precautions should always be followed. These include:

•  READ ALL INSTRUCTIONS BEFORE USE. 
•  Use the iron only for its intended purpose. 
•  To protect against a risk of electric shock, do not 

immerse the iron in water or other liquids.

•  The iron should always be turned to the minimum 

setting before plugging or unplugging from the 
outlet. Never yank the cord to disconnect from 
the outlet; instead grasp the plug and pull to 
disconnect.

•  Do not allow the cord to touch hot surfaces. Let 

the iron cool completely before putting away. Loop 
cord loosely around the iron when storing.

•  Always disconnect the iron from the electrical 

outlet when filling with water or emptying, and 
also when not in use.

•  Do not operate the iron if the power cord is 

damage or if the iron has been dropped or 
damaged. To avoid a risk of electric shock, do not 
disassemble the iron. Take it to a qualified service 
person for examination and repair, or contact our 
customer service. Incorrect reassembly can cause a 
risk of electric shock when the iron is used.

•  Close supervision is necessary for any appliance 

being used by or near children. Do not leave the 
iron unattended while connected to power or on 
an ironing board.

•  Burns can occur from touching hot metal parts, hot 

water or steam. Use caution when you turn a steam 
iron upside down or use a burst of steam as there 
may be hot water in the reservoir.

•  Avoid rapid movement of iron to minimize hot 

water spillage.

•  The iron must not be left unattended while it is 

connected to power.

•  The plug must be removed from the power outlet 

before the water tank is filled with water.

•  The iron must be used and rested on a stable 

surface.

•  When placing the iron on its stand, ensure that the 

surface on which the stand is placed is stable.

•  The iron is not to be used if it has been dropped, if 

there are visible signs of damage or if leakage. 

SPECIAL INSTRUCTIONS

•  To avoid circuit overload, do not operate another 

high-wattage appliance on the same circuit.

•  If an extension cord is absolutely necessary, a cord 

with an ampere rating equal to or greater than the 
maximum rating of the iron shall be used. Cords 
rated for less amperage may overheat. Care should 
be taken to arrange the extension cord so that it 
cannot be pulled or tripped over.

SAVE THESE INSTRUCTIONS

This product is for household use only.

SAFETY FEATURES
POLARIZED PLUG (FOR US ONLY)

This appliance has a polarized plug (one pin is wider than the other). To reduce the risk of electric shock, this 
plug is intended to fit into a polarized outlet in only one orientation. If the plug does not fit fully into the outlet, 
reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any 
way.

TAMPER-RESISTANT SCREW

WARNING: 

This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. 

To reduce the risk of fire or electrical shock, do not attempt to remove the outer cover. There are no user-
serviceable parts inside. Repairs should be done only by authorized service personnel.

Note: 

If the power cord is damaged, it should be replaced by qualified personnel.

Содержание Beautural 724EU-0001



























Отзывы: