10
11
EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
Repeat Function
1. During disc playback:
• Press the Repeat button once and the “REP 1” indicator will show on the display.
The turntable will then keep repeating the currently playing track.
• Press the Repeat button three times and the “REP ALL” indicator will show on the
display. The turntable will play all songs repeatedly.
• To cancel all repeat functions, press the Repeat button repeatedly until the
REPEAT indicator on the display turns off.
LISTENING TO AUX IN (LINE IN/AUDIO IN)
1. Plug a 3.5mm audio cable into the 3.5mm port of the mobile device or the Aux
out/Line-out/Audio of the MP3 or MP4 player.
2. Plug the other end into the AUX IN jack on the turntable.
3. Make sure the turntable and media device are turned on.
4. Press the Function button until the “AUX and AU” indicator confirming AUX mode
has been selected shows on the display.
5. Set your media device to start playing.
6. This setup will allow external device sound to be broadcast through the turntable.
LISTENING TO AUX OUT (LINE OUT/AUDIO OUT)
1. Audio from the turntable can be run through a home stereo system, television or
other stereo source using the AUX OUT RCA Jacks.
2. To make this connection, you need a standard RCA cable. Plug the red and white
connectors on one end of the cable into the red and white AUX OUT RCA Jack
on the rear of the turntable. Plug the other end of the cable into the AUX INPUT
Jacks (LINE INPUT/AUDIO INPUT) of your selected device.
3. Operate the turntable as usual.
NOTE:
You can still listen to the turntable when using the Audio Output feature.
LISTENING TO A CASSETTE
Loading a Cassette Tape
1. Connect to power and press the button to turn on the turntable.
2. Turn on Cassette mode by pressing the Function button until the “TAPE and tAP”
indicator shows on the display.
3. Insert the cassette tape into the cassette slot. The side of the cassette you wish to
listen to or record onto should be facing up.
Playing a Cassette Tape
1. When a cassette tape is inserted, its music will start playing after a few seconds.
2. Make sure the Volume control dial is in the correct position.
3. When removing or stopping playback of the cassette tape, fully press the Eject
/
button.
Skipping Tracks
When the cassette tape is playing, press the Eject /
button halfway down to
fast forward through the tape.
NOTE:
To avoid damage to the cassette mechanism and your tape, always eject the
tape after each listening session.
CONNECTING HEADPHONES
Adjust the turntable volume to minimum before connecting headphones/
earphones to the headphone jack. Headphones/earphone should have a 3.5mm
diameter stereo plug and an impedance of 8-32 ohms. When headphones are
connected, sound from the turntable’s internal speakers will automatically stop.
NOTE:
Extended listening of music at high volume may damage hearing. It is highly
recommended to listen at comfortable volume levels.
RECORDING
This turntable can record music from a CD disc/Record/Cassette/Aux to a USB
memory/storage device.
1. Connect to power and press the button to turn on the turntable.
2. Insert a USB device into the USB port.
3. Press the Function button to select the desired mode you want to record.
• Recording from a CD: Place the CD disc into the CD compartment. Press the
button to start playing and press
/
or +10 button to search for the track to
be recorded.
• Recording from a vinyl record: Place the record on the turntable and move the
Tone Arm to the desired starting point over the record.
• Recording from a cassette: Place a cassette tape into the cassette slot. Press in the
Eject /
button halfway down to fast forward through the tape.
• Recording from Aux In: Connect the external device to the AUX IN Jack. Start
playback of the device’s music.
4. After the above media’s playback has started, press the
Record
button to start
recording. "rEO" will show on the display.
5. To stop recording, press the
Record
button once.
