4
5
EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
1. Dust Cover
19. Screw Lock
2. 45 RMP Adapter
20. Hold Down Clip
3. Turntable
21. Tone Arm Control Lever
4. Repeat Button
22. Speed Selector
5. PROG/CLK Set Button
23. Auto Stop Control
6. Record Button
24. Tone Arm Rest
7. Function Button
25. Cassette Slot
8. Power Button
26. Eject /
Button
9. LCD Display
27. Speaker
10. Volume Control Dial
28. +10 Track Button
11. USB Port
29. Play / Pair Button
12. Dial Scale
30. Stop Button
13. CD Door
31. Skip
/
Button
14. FM Wire Antenna
32. Tuning Control Dial
15. AUX Out (RCA Jack)
33. Phones Jack
16. DC Input Jack
34. AUX Jack
17. Head Shell
35. CD Door Open Button
18. Tone Arm
GETTING STARTED
Connecting The AC Adapter
1. Plug the AC adapter into a normal power outlet.
2. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the back of
the turntable.
REAR VIEW
To Wall Outlet
NOTE:
• Only use the supplied power adapter.
• Please ensure that your outlet voltage is compatible before connecting the turntable
to power.
Switching On The Turntable For The First Time
Plug into AC power by following the instructions on the previous "Connecting The
AC adapter" section. Press the button to turn on the turntable, and press it again
to turn off the turntable.
Switching Between Different Sources
After turning on the turntable, press the Function button to switch between CD/
USB/BLUETOOTH/PHONO/FM Radio/AM Radio/AUX/CASSETTE TAPE sound sources.
Adjusting Sound Volume Level
After turning on the turntable, turn the Volume control dial to adjust the level of
sound volume.
Power Management Function
The turntable will automatically go into standby mode after 15 minutes of inactivity.
To resume operation, simply press the button to wake the turntable.
Display Dimmer
In standby mode, press and hold the button for 3 to 5 seconds, the display
brightness will dim. To resume operation, simply press and hold the button for 3
to 5 seconds again.
SETTING THE CLOCK
1. The clock can be set when the turntable is in Standby mode and the screen is
displaying the time.
2. Press and hold the CLK SET button until the display digits flash on the display.
3. Press the
/
buttons to select a 12 or 24-hour format for the clock.
4. Press the CLK SET button to confirm the hour format and the hour digits will flash
on the display.
5. Press the
/
buttons to increase or decrease the hour time.
6. Press the CLK SET button to confirm the hour setting and the minute digits will
flash on the display.
7. Press the
/
buttons to increase or decrease the minute time.
8. Finally, press the CLK SET button to confirm and set the time.
NOTE:
• When the turntable is disconnected from power, the clock settings will be erased.
Please set the clock again when the turntable is plugged back into power.
• When the hour format is set on 12H, carefully check that the AM/PM indicator is correct.
