|
1
SBP-1100e Features
• External dimensions approx. 15” L x 11” W x 6 .5” H, including receptacles with carrying handle folded.
• Fits within a space 16” L x 12” W x 7” H, but 12” additional length should be allowed for cable bends.
• Integrated battery monitor panel reports condition and state-of-charge percentage.
• Can be recharged more than 400 times, typically.
• Durable, rugged, water resistant, and crush resistant case; airtight (with pressure relief valve)
• 100% depth of discharge allowed, versus 30% to 60% for lead-acid storage battery technologies.
• Light weight — a third of the size and weight of comparable sealed lead acid packs with casing and venting.
• Deep discharge WITHOUT damage, no urgency to re-charge.
• Automatic shut-down at full discharge with preceding user notifications.
• Rapid charging — 10 hrs to full charge from empty, using AC power adapter:
SBP-AC-ADAPTER-24V-130W
• Integrated battery pack protection circuitry for safety.
• Partial charge/discharge cycles OK, no memory effects.
• Cells do not out-gas, environmentally benign compared to lead or nickel-cadmium chemistries.
SBP-1100e Specifications
Standard Output Voltages (factory-set)
13.8 volts DC, +/- 4%, for nominal 12-volt applications, 25.3 volts DC, +/- 4%, for nominal 24-volt applications
Other Output Voltages (examples)
6, 9, 12.4, 16, 24, or 28 volts DC, +/-4 %, factory-set
Custom Output Voltages
Fixed voltages from 6 to 28 volts DC, +/- 4%, factory-set
Input (Charging) Voltage
10 to 28 volts DC, continuous (filtered or low-ripple) Use an approved power source
Input (Charging) Power
up to 200 watts, in increments of 50 watts.
Energy Storage Capacity (10 hr. discharge)
1100 watt-hours, initial capacity, 1000 watt-hours available for output
Amp-hour Storage Capacity (10 hr. discharge)
72 Amp-hours (13.8 volt model), 40 Amp-hours (25.3 volt model)
Temperature Range for charging
0˚to 40˚C (32 deg. F to 104 deg. F)
Temperature Range for discharging
-20˚to 50˚C (-4 deg. F to 122 deg. F)
Temperature Range for storage
-20˚to 60˚C (-4 deg. F to 140 deg. F)
Max. Continuous Discharge Load
(less than 1 hour, at 25 deg. C, 77 deg. F)
25.3 volts: 300 watts
13.8 volts: 280 watts
9 volts: 180 watts
6 volts: 120 watts
Max. Continuous Discharge Load
(more than 1 hour, at 25 deg. C, 77 deg. F)
25.3 volts: 200 watts
13.8 volts: 180 watts
9 volts: 120 watts
6 volts: 80 watts
Charge/discharge Cycle Life
more than 400 cycles, typical (20% reduced capacity after 300 discharge cycles)
Service Life
about 5 years, typical, for 20% reduced capacity due to aging. Batteries age faster at higher storage temperatures and at higher
storage state-of-charge.
Weight
approx. 28.5 lbs.
Recharge time from empty
8 to 10 hours, using the 130 watt SBP AC adapter (SBP-AC-ADAPTER-24V-130W). Consult 1100 Energy for other charging options
Output Noise and Ripple
100 mV peak-to-peak at maximum load, for 25.3 volts DC output. Noise and ripple are proportionate to loading.
Power Input Receptacle
MS3112E14-5P, 5-pin contact male MIL receptacle, box mount
Power Input Mating Plug
MS3116F14-5S, 5-socket contact female MIL plug, cable-mount, with strain-relief clamp. (Plug is available from 1100 Energy as item
no. SBP-CON-INPUT)
Power Output Receptacle
MS3112E14-5S, 5-socket contact female MIL receptacle, box mount
Power Output Mating Plug
MS3116F14-5P, 5-pin contact male MIL plug, cable-mount, with strain-relief clamp. (Plug is available from 1100 Energy as item no.
SBP-CON-OUTPUT)
Serial Data Receptacle
MS3112E10-6P 6-pin contact male MIL receptacle, box mount
Serial Data Mating Plug
MS3116F10-6S 6-socket contact female MIL plug, cable-mount, with strain-relief clamp. (Plug is available from 1100 Energy as item
no. SBP-CON-DATA)
Содержание SBP-1100e
Страница 1: ...SBP 1100e Smart Battery Power System Software version 4 1 2 User Manual ...
Страница 14: ...10 Eleven Hundred Energy Corporation ...
Страница 15: ......
Страница 16: ...12 Eleven Hundred Energy Corporation ...