P. 25 of 89
nanobox | razzmatazz User Manual
Oct 14, 2022
SEQUENCE NAME &
RECORDING INDICATOR
See which sequences is
selected, and if recording is
active.
CLOCK
Touch to close the
Transports pop-up.
METRONOME
LEVEL
Control the volume
of the metronome.
METRONOME
STATUS
Touch to turn on
and off.
TAP TEMPO
Tap at the
desired pace to
set the tempo.
TEMPO
Turn the top
knob or touch
and drag here to
adjust.
SWING
Set the amount
of swing in the
rhythm.
TRANSPORT CONTROLS
Touch to control playback and
recording of sequences. Play
must be active in order to record.
THE TRANSPORTS POP-UP
There are two ways to quickly access the Transports pop-up from anywhere in
razzmatazz:
1.
Touch the Clock in the top right corner of the screen.
2.
Hold down the Right Arrow button.
From here, you can start and stop playback and recording of sequences, start
playback of clip pads (more on those later), and set up the metronome. You can also
set the tempo and adjust the swing.
The name of the currently selected sequence always appears to the left of the clock
at the top of the screen.
Sequences play in a
loop until you
change sequences or
push STOP.
