32
33
DVR: Setup (Recording)
DVR: Setup (Recording)
This product is a hybrid HD vehicle MDVR allowing
connections from various types of cameras. Table 1 shows
interface definitions of various analog cameras. The standard
interface is for IP cameras. A user must select a camera type
according to the hardware connection used and configure the
proper corresponding settings in the software.
After connecting the camera according to the above methods, go to the
Setup menu
Record Setup
Channel Mode
interface, where you can set
video resolution, frame rate, picture quality, and audio recording for each
channel.
Connection
Pin #
Interface
Definition
Pin #
Interface
Definition
1
12V OUT
3
A-IN
2
GND
4
V-IN
Connection
Mode
Connection
Diagram
Model 10-8 HD4SD
Connection of a single
analog camera
4 ways of D1/960H/720P AHD video inputs
available.
Mixed connection of
analog and network
cameras
Max 4 ways of 720P AHD video 1
way of IPC HD video inputs available, with
connection to a switch also possible.
Step 3: Channel Mode
To ensure your option changes are saved when you are done,
move your cursor to the
“Save”
button and then press the
“Enter”
button.
1. The frame rate is adjusted
according to the image
format. The higher the
frame rate, the better the
timelines will be.
PAL is adjustable between
1-15 frames per second
(fps); NTSC is adjustable
between 1-30 fps.
2. Level 8 indicates the
lowest picture quality. The
higher the picture quality
is, the netter the video
definition will be.
Table 1
Camera Connection Modes
Table 2
Software Settings
+
FIG. 18
Channel Mode Interface
