Tu
Page 13
Copying the Program
Time Period Programming
OWNER'S MANUAL
Select Yes to copy
the previous day’s
program to the day
displayed.
The copy command becomes available after
programming the entire previous day.
If Yes is selected:
If No is selected:
If
No
is selected, as in previous steps, flashing prompts for
input will appear for the four time periods for the next day.
After programming for all seven days is
complete, press the PROGRAM button to
leave the Setup screens. If no buttons are
pressed, the display will leave the setup
screens after 60 seconds.
Selecting Yes, then pressing NEXT
will copy the previous day’s program.
If yes is selected again, or each time,
this routine will repeat.
Press
Press
NEXT
NEXT
OFF
RUN
SET
PROGRAM
S1-THEU21P7S
