1-CUBE SU 6.2. Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 13

1-CUBE SU 6.2. Скачать руководство пользователя страница 13

13

6.

M

ONITORING

RS232

During all the methods

Heating Immersion Circulator

the records of the temperature curves in PC are possible. Switch

off the device and connect the PC com port with the RS232 com port with the help of supplied communicating cable.
Switch  on  the  device  and  start  any  method.  Use  any  program  which  makes  possible  the  RS232  communication  to
record the temperatures in PC. Program Hyperterminal (which is part of WINDOWS) or program Serial Watcher (which
is  part  of  Monitoring  Mash  Bath  supply)  can  be  used.  Note.  It  is  necessary  to  adjust  the  program  for  ASCII  signs
reception.

7.

M

AINTENANCE

Throughout  the  operation  the  scale  can  be  sedimented  on  the  heating  elements.  It  is  important  to  remove  these
sediments.    Pour  the  water  with  either  the  acetic  acid  or  citric  acid  into  the  bath  and  heat  up  and  hold  the
temperature of 65 degrees Celsius for one hour in the bath. Then disconnect feed el.cord out of the socket, suck the
sediments with the help of a hose and clean the vessel.

8.

I

MPORTANT WARNINGS

The Cooling Bath must be always located on the nibs and mustn’t be tilted or turned upside down
in any case!!!!

If the device is transported at temperature below freezing point, it is necessary to leave the instrument for about 2
hours at room temperature before you start to work with it.

The fuses are located on the back panel of the Water Bath. It is forbidden to replace the fuse by fuse with different
value than the value indicated on the equipment.

Service:

For service contact the manufacturer:

1-CUBE, Hamry 3567, 580 01 Havl.Brod, Czech Rep.

tel. 00 420- 569 433 620

fax .00 420-569 422 144

[email protected]

NOTICE:

It is forbidden for anyone except for the manufacturer or authorized company to repair the apparatus.

At the end of the apparatus life we recommend that it is according to corresponding waste categorization.

Take the metallic parts made of iron, brass, plastic elements and packing material to the separated collection as a
secondary raw material. You can also order the apparatus liquidation at the above mentioned company that ensures
the liquidation of the waste according to Waste Act.

«
...
11
12
13

Содержание SU 6.2.














Отзывы:

Нет отзывов