manualshive.com logo in svg

0N3 X5 System, Руководство пользователя

Поделиться
Скачать
0N3 X5 System Скачать руководство пользователя страница 45

MANUGENX5 - Version 1.01 24.03.2021

© 2021 0N3 s.r.l. -  Subject to change without notice

45

8 

Installation Guidelines

8.1  Installation

The Base Station is designed for quick installation on DIN rail (IP20 protection, not UL evaluated)

Provide ground connection at dedicated mechanical screw and at power connector pin.

The Wi-Fi antenna supplied is external and connected to the Base Station device on SMA connector.
It is recommended to use a Wi-Fi 2.4/5GHz compatible extension cable to place the antenna in the most advantageous 
point in order to maximize the coverage of the radio signal. Check in advance the quality of the radio signal in the area 
surrounding the operating area)by monitoring the level of the Wi-Fi signal from application on Wireless Handheld. We 
recommend never to use the system with a Wi-Fi signal below -80dBm (a notch). 

It is recommended to implement at the application level of the passive monitoring mechanisms for the radio signal in 
order to promptly inform the user of any limit situations via buzzer, vibrator, pop-up.

!

DANGER!

• 

It is mandatory to install the Base Station module in a cabinet which is certified with a protection 
degree of IP54 (or more).

•  The position of the external antenna must always respect the minimum distance of 20cm from the 

human body for the protection of human health.

CAUTION!

• 

The loss, even temporary, of the Wi-Fi link causes an unintentional opening of the security relays.

• 

Like any Wi-Fi device, the X5 System is also sensitive to channel occupancy from the point of view of 
link reliability. It is the responsibility of the user to select the Wi-Fi channel to use, selecting it among 
the freer ones, and ensuring that the level of occupancy is preserved over time. Typically the SRD 
(Short Range Device) channels in the 5GHz band are the less used.

Содержание X5 System




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды