www.zuum.life ZM04152020
8805 Jones Rd. Ste. C104, Houston, X 77065 * 1-888-861-7351 * www.zuummedia.com
ZM 032014
IP3P
PoE IP Camera Extender Over Coax or Two-Wire
Model: IP3P PoE Extender is designed to send and extend Ethernet network with PoE and can be established using existing cables up to
1,968 feet (600M). You can use Coax cable or any two-wire cables (UTP cable, telephone line, antenna cable, or bell wire) that is no longer
in use to connect a 10/100Mbps PoE device, IP telephone, PC…etc. without having to lay any new cables. Extended pass through PoE to
allow a single PoE source, such as a PoE network switch (IEEE 802.3af/at) to provide power to both TX/RX and the IP/PoE camera. It is a
perfect solution for extending data and power transmission for warehouses, parking lots, campuses, casinos etc. with existing cable long
ranges.
Features:
>
Extend PoE signal up to 1,968 feet (600M), Ethernet or any TCP/IP devices up to 3,280 feet (1000M)
>
Support 10/100 Mbps transmission rate
>
Provides pass-through PoE up to IEEE802.3 at 30W
>
Provides DC12V 1Amp power to camera
>
Supports high power PoE to PTZ cameras at long distances
Panel View:
IP3PT
IP3PR
LED Indication:
LED Indication
Status
Function
ON
Green On
Power on
LINK
Blue On
Linked
STATUS
Red On
Link failed
RJ45 (Green/Orange)
Green Flash
Data transmission
Orange On
POE transmission
