V1.2 - last updated 01/07/2006 – © Copyright 2006 C.Day – all rights reserved.
ZARES ZLVHF01 4W VHF Amateur Transceiver
This compact transceiver provides clear communications & selectable 1W/4W transmit output power. Keypad or
optional PC frequency entry with up to 99 user defined channels. Comes pre-programmed with the 32 most popular
2m NI/SI repeater channels, which you can change. Each channel stores user defined TX/RX split for repeaters &
CTCSS tone or DCS code for squelch. Cool blue LCD shows frequency, channel, TX power, battery condition & RX
signal strength. Scan functions to monitor channels or step through the entire frequency range.
Features
•
LCD display & direct frequency keypad entry
•
99 user programmable channels.
•
Supports channel & frequency scanning
•
Selectable 1W or 4W transmit power
•
LCD and Keypad blue back light & Keypad key lock
Package Contents
1x VHF Transceiver
1x Drop-in battery charger & 12V charge lead
1x Antenna
1x Ni-MH rechargeable battery
1x Belt clip
1x Speaker / Microphone cover & 1x Cover Screw
IMPORTANT WARNINGS
•
You need a license from the Ministry of Economic
Development to legally operate this transceiver.
•
This Transceiver is not a toy. Do not allow children or
infirm persons to play with it.
•
The recommended use of this transceiver is 1 minute talk
to 4 minutes receive. If you talk longer, the back will get
hot. Beware of this and take adequate precautions.
•
This transceiver is not waterproof. Do not leave it or store
it in a humid, hot or damp environment or expose it to
direct sunlight for prolonged periods.
•
This transceiver has been optimized for use within the NZ
amateur 2m band only. If operated outside this band the
stated specifications are not guaranteed.
•
DO NOT TRANSMIT WITHOUT THE ANTENNA or you could
permanently damage the transceiver beyond repair.
•
This transceiver is not designed for, or use in, life support
appliances, devices, or systems where malfunction of the
product can reasonably be expected to result in personal
injury.
•
Do not use this transceiver near flammable liquids, fumes
or where a spark could cause a fire.
•
Do not short-circuit the transceiver battery, charge it with
anything other than the provided charger, disassemble it or
throw it away in a fire.
•
This transceiver contains no user serviceable parts. Refer
all repairs to authorized service personal only.
LAYOUT
LCD SCREEN
CHARGE THE BATTERY BEFORE USE
The battery is supplied without a charge and MUST be charged before you use the transceiver. Screw on the antenna, attach the battery, plug
in the charger and drop it into the charge cradle. When charged, the red light on the charge cradle will turn green.
