Yamaha RX-V470 Owner'S Manual Download

Page: 1 / 27

ENGLISH

Natural Sound Stereo Receiver

RX-V470

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE, REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

OWNER'S MANUAL

IMPORTANT!

Please record the serial number of this unit in the space
below.

Model:
Serial No.:

The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.

WARNING

To reduce the risk of fire or electric shock, do not expose
this unit to rain or moisture.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the presence

of uninsulated “dangerous voltage” within the product's

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

Summary of Contents for RX-V470




























Search results

Summary of Contents for RX-V470

Reviews:

Related manuals for RX-V470

Brands by name

Popular brands

Yamaha RX-V470, Owner'S Manual

Search results

Summary of Contents for RX-V470

Reviews:

Related manuals for RX-V470

Brands by name

Popular brands