Machine Screws
#7 Drill, 1/4-20 Tap
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
"DL" suffix (Delayed Action) is an optional
feature. A separate sheet is supplied
showing closer adjustments.
NOTE:
For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
instruction sheet for installation sequence
and closer adjustments only.
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°.
These door closers should NOT be
installed on the exposed side (weather
side) of exterior doors.
Top Jamb
Installation
See Page 5
289A Soffit Plate
Used with Parallel
Arm Closers Only
Soffit Plate
CA
UTION
CA
UTION
An Incorrectly installed or improperly adjusted
door closer can cause property damage or
personal injury. These installation instructions
should be followed to avoid the possibility of
misapplication or misadjustment.
Installation Instructions
80-9350-2502-010 (12-09)
Non Hold Open Models
Sized
(Sizes 2,3,4,5,6)
52BC
53BC
54BC
55BC
56BC
Adjustable
(Sizes 3 thru 6)
51
(Sizes 1 thru 4)
51BF
Non Handed Door Closer
Tri-Pack
50 Series
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Regular Arm
Installation
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Top Jamb
Installation
See Page 5
Regular Arm
Installation
See Page 2
Parallel Arm
Installation
See Pages
3 & 4
Parallel Arm
Installation
See Pages
3 & 4
Main Arm
Connecting Rod
Adjusting
Tube
Arm Assembly
Elbow
Screw
Weaker
-
Stronger
+
3/16”
#7
1/4-20
Spring Power Adjustment Screw
51(BF) Series Only
"BC" Valve
Pinion Cap
Closer
Size
Stamp
"L"Valve
"S"Valve
Standard Components
Optional Components
1-4
Closer Body
Sleeve Nut and Bolt
Thru Bolt and Grommet Nut
Drill 9/32 thru from Closer Side
3/8 Drill other side
Drill 9/32 thru from Closer Side
3/8 Drill other Side
(Optional)
Metal
Wood
214
Plate
Co
ver
