background image

                                                          
 

 

Congratulations on your selection of a quality 

XACT

 product. With proper care and adherence to the set-up and user 

instructions in this Owner’s Manual, this unit will provide you with years of trouble-free service. 
 

XACT

 is committed to providing quality products that fit your needs. We would like to have any comments or suggestions 

you might have on this product. You may mail your comments to: 
 
 

 

 

U.S. Electronics 

 

 

 

105 Madison Avenue 

 

 

 

New York, NY 10016 

 
The KP4X is the newest generation in personal two-way communications. The KP4X is a lightweight, compact two-way 
communication device that can be used to communicate with family or friends at parks, shopping malls, sporting events, 
concerts – any indoor or outdoor activity. 
 
Here are some of the features of this new two-way COMMUNICATOR: 
 

• 

Stop Watch Style with Detachable Neck Cord

 

• 

14 FRS Channels

 

• 

Up to 2.0 Mile Range

 

• 

Auto Squelch

 

• 

Auto Battery Saving

 

• 

Internal VOX

 

• 

Channel Scan

 

• 

12 Hour AM/PM Time Clock

 

• 

Backlit LCD Display on COMMUNICATOR Mode

 

• 

Uses 3 AAA size Alkaline battery with Ni-MH battery capability (not included)  

 

Please read this Owner’s Manual carefully to get the most out of your TWO-WAY COMMUNICATOR. 
 

NOTE

: The maximum range will vary depending on terrain and environment. Range will be greater in open fields. While 

range is shorter within and around buildings or large structures. This unit may not ensure privacy of communication. 
 
 
 
 
 

 
Safety Information :

 

 
Your wireless hand-held portable transceiver contains a low power transmitter. When the Push-to-Talk (PTT) key is 
pushed it sends out COMMUNICATOR frequency (RF) signals. This devise is authorized to operate at a duty factor not to 
exceed 50%. 
In August 1996, The Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for 
hand-held wireless devices. 
 
Important Note: To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and ANTENNA at 
least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed away from the face. 
If you wear the handset on your body while using the headset accessory, use only the manufacturer’s supplied BELT 
CLIP for this product and ensure that the ANTENNA is at least 1 inch (2.5 centimeters) from your body when transmitting. 
 
Use only supplied ANTENNA. Unauthorized antennas, modifications, or attachments could damage the transmitter and 
may violate FCC regulations. 
 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device 
may not cause harmful interference, and (2) this device must accept any interference received, including interference that 
may cause undesired operation. 
 
 
 
 
 
 
 
 
 

FEATURES 

FCC NOTICE 

Summary of Contents for KP4X












Reviews: