background image

         

WARNING:

 If the information in these instructions 

is not followed exactly, a fire or explosion may result 

causing property damage, personal injury or loss of life.

 

-

 Do not store or use gasoline or other flammable vapors    

   and liquids in the vicinity of this or any other appliance. 

 

WHAT TO DO IF YOU SMELL GAS:

 Open all windows.

 Do not try to light any appliance.

 Do not touch any electrical switch; do not use  

  any phone or cell phone in your building.

 Extinguish any open flame.

 Immediately call your gas supplier from a neighbor’s 

  phone. Follow the gas supplier’s instructions.

 If you cannot reach the gas supplier, call the fire 

   department.

 Installation and service must be performed by a    

   qualified installer, service agency or the gas supplier.

7,400 BTU/hr.

HIGH EFFICIENCY DIRECT VENT 

WALL FURNACE 

        WARNING: 

 This Direct Vent Wall Furnace is approved 

for aftermarket manufactured home installations (once the 

manufactured home is sold, installed and stationary) unless 

prohibited by local codes. Not for manufactured home 

manufacturer (factory) installation. Do not install this  

furnace (natural or propane gas) in trailers or  

recreational vehicles. 

        WARNING:

 This product can expose you to 

chemicals including epichlorohydrin which is known to 

the State of California to cause cancer and birth defects 

and/or other reproductive harm. For information go to  

www.p65warnings.ca.gov

        WARNING:

 Improper installation, adjustment,  

alteration, service or maintenance can cause injury or 

property damage. Refer to this manual. For assistance or  

for additional information consult a qualified installer or,  

service agency.

MODEL NUMBER 

(natural gas)

0743512

MODEL NUMBER 

(propane gas)

0743511

SAVE THIS MANUAL FOR FUTURE REFERENCE.

READ THIS OWNER’S MANUAL CAREFULLY BEFORE YOU 

INSTALL YOUR NEW WILLIAMS WALL FURNACE.

250 West Laurel Street, Colton CA 92324  •  WWW.WFC-FC.COM  •  1-888-444-1212  

TM

OWNER’S MANUAL

INSTALLATION INSTRUCTIONS

VISITEZ NOTRE SITE WEB POUR LA VERSION 

FRANÇAISE DE CE MANUEL 

VISITE NUESTRA PÁGINA WEB PARA LA VERSIÓN EN 

ESPAÑOL DE ESTE MANUAL 

 

https://www.williamscomfortprod.com/products/furnaces/

Summary of Contents for 0743511

















Reviews: