RF209S
Summary Manual
Link: Charge the receiver then press and hold "SET" button for 3
seconds, wait for the link instruction after the orange light flashes slowly.
Mode select:
1
Receiver setting way, press the "SET" to charge, then enter into model
setting, gently click the "SET" into switcher mode, press and hold "SET" to
confirm .
2
Transmitter setting way , please carry out in
[
Linkage setting
]
-
[
Receiver output
]
under the normal communication state of transmitter
and receiver .After setting,
return to the superior menu and save the
setting (the receiver light color would be changed).
MODE
LED
Action
Status
WORK
Purple
Never
PWM normal work mode
Green
Never
W.BUS normal work mode
Blue
Never
PPM normal work mode
Red
Never
No signal
Slow flash
Low voltage
Orange
Slow flash
Linking
SET
Purple
Slow flash
PWM mode
Green
Slow flash
W.BUS mode
Blue
Slow flash
PPM mode
PPM/PWM/W.BUS/W.BUS2
CH1~7
:
PWM
PPM/W.BUS
Signal
Positive
Negative
USB port
Link key
Status light
External voltage
inspect port
Red line to the positive pole
1Ω resistor to the negative
