WaterLogic WL2FLT Troubleshooting Download

Page: 1 / 3

WL2FLT Manual Page 41 – Revision 7-19-21

POWER TROUBLESHOOTING INDEX

1. Red Heater & Compressor Power Switch won't light and the Red LED on the Front

won't light

2. Red Heater & Compressor Power Switch is lit but the red LED on the Front is not lit

3. Compressor Runs but does Not Chill

4. Compressor is Not Running

Red Heater and Compressor Power Switch won’t light and the Red LED on the

Front won’t light

Possible Reason

Solution

Circuit Breaker

Check the Circuit Breaker

Fuse is Blown

Replace Fuse

Defective / Loose Power Cord Check that Power Cord is properly plugged in. If it is properly

plugged in, use a different power cord to verify.

Failed Socket - Power Line

Noise Filter, ElectroMagnetic

Interference filter (EMI)

Replace Socket - Power Line Noise Filter, ElectroMagnetic

Interference filter (EMI)

Defective Red Heater &

Compressor Switch

Replace Red Heater & Compressor Switch

Summary of Contents for WL2FLT

Page 1: ...r Power Switch won t light and the Red LED on the Front won t light Possible Reason Solution Circuit Breaker Check the Circuit Breaker Fuse is Blown Replace Fuse Defective Loose Power Cord Check that...

Page 2: ...CB Defective Red Heater Compressor Switch Replace Red Heater Compressor Switch 3 Compressor Runs But Does Not Chill Possible Reason Solution Condenser is dirty Clean the condensing coil of any obstruc...

Page 3: ...Heater Compressor Switch on I ON Compressor Starting Circuit Turn Red Heater Compressor Switch off O OFF Remove the compressor cap on side of the compressor Disconnect the black and red terminal conn...