Check the standard power requirement before connecting
to power.
Settings can be made using the 5 buttons on the rear
of the camera.
1. Press the SET button
• Settings can now be made. The SETUP menu is
displayed on the monitor.
2. Select a menu item from the list available by using
the UP and DOWN buttons.
• Functions are selected using up and down
buttons.
• The selected position is displayed in blue.
3. Change a selected item by using the Left and Right
buttons.
4. To finish and save the settings, select 'EXIT' and
press the SET button.
How to Use the Camera
Names and Functions of Parts
How to Use the Camera
How to Use the Camera
MENU
LENS INSTALLATION
POWER CONNECTION
WDR Day/Night
Color Box Camera
MODELS (NTSC/PAL)
20C708W / 21C708W
03/07/11 INS-20C708W Rev A Preliminary
• 1/3” Pixim CMOS progressive scan
• 690 TVL resolution
• Low 0.1 lux sensitivity
• Dynamic range to 120dB
• Global shutter
• 3D motion adaptive noise reduction (DNR)
Features available via OSD
• Motion detection
• Day/night mode
• Digital pan/tilt/zoom (8x)
• Digital slow shutter (DSS)
• Push to set white balance
• Sens-up (2x-32x)
• NTSC/PAL selectable
• 20C708W (NTSC) or 21C708W (PAL) camera
• Mounting Plate attached to housing with 2 screws.
(movable for top mounting)
• Operation manual
• C mount adapter ring
SAFEGUARDS & WARNINGS
1. Read instructions before operating camera.
2. Avoid mounting in direct sunlight.
3. Installation and repair should be undertaken by
authorized personnel only.
INSTALLATION TIPS
If the camera is to be mounted outdoors, or in hot,
humid, or otherwise harsh environments, a
secondary enclosure should be used.
shown with optional lens
(not included)
Pin No.
LENS
DC
VIDEO
No.1 Pin
Damping-
Red(power)
No.2 Pin
NC
No.3 Pin
Drive+
White(video signal)
No.4 Pin
Drive-
Black(GND)
Dual Power Type
(AC 24V/DC 12V,
AC 24V Class2)
DC Power Type
(DC 12V, 500mA)
• OUTDOOR
• FOCUS
• AGC
• HIGHLIGHT
• SENS-UP
• USER
• OUTDOOR
• BW
• SHARPNESS
• DZOOM
• SYNC
• INDOOR
• HIGH
• INDOOR
• MANUAL
• COLOR
• FLIP
• GAMMA
• VIDEO OUT
• PRIVACY
SETUP
• RETURN
• NORMAL
• LENS
• EXPOSURE
MODE
• DNR
• COLOR ROLL
• MIDDLE
• LOW
• ATW
• AWB
• AUTO
• EXTERN
• FREEZE
• COLOR GAIN
• CAMERA ID
• MOTION
• RESET
SETUP MENU
PRESETS
EXPOSURE
WDR
WHITE
BALANCE
DAY/NIGHT
IMAGE ADJ.
SPECIAL
EXIT MENU
IRIS JACK
OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC 24V IN
DC12V IN
SET
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
PRODUCT FEATURES
BOX CONTENTS
Mounting bracket screw holes
Use the screw holes when fixing the camera onto the
mounting bracket. Please use the clamp screw as
specified in the picture.
1. Auto iris lens selection switch
Change the mode to DC or VIDEO depending on the
type of auto iris lens being used.
2. OSD Extra
Connects to the remote controller (option).
3. Power lamp
Lights up when the correct power is supplied to the
camera.
4. Setting button
SET button: Used for the menu display. This button
can be used to confirm settings after changing the
value of the selected function or current conditions.
UP & DOWN buttons: Used for selecting items by
moving the cursor up or down on the menu screen.
LEFT & RIGHT buttons: Used when changing item
values, by moving the cursor to the left or right on the
menu screen.
5. Power input terminal
The mounting bracket can be
separated and attached on
the top of the camera.
※
Please do not tighten the
screw to a depth of more
than 5mm, otherwise serious
damage can occur to the
inside of the camera.
SETTINGS
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
Select the function using
the UP or DOWN button
Change the status
using the LEFT or
RIGHT button
NOTE: An item with the .. icon has sub-menus.
To select a sub-menu, press the SET button.
