background image

Quick Start Guide — Revision 4.0
For use with Vicon Lock+ 1.0
Vicon Motion Systems Limited reserves the right to make changes to information in this document without notice. Companies, names, and data 
used in examples are fictitious unless otherwise noted. No part of this publication may be reproduced, stored in a retrieval system, or transmitted 
in any form or by any means, electronic or mechanical, by photocopying or recording, or otherwise without the prior written permission of Vicon 
Motion Systems Ltd.
Vicon® is a registered trademark of Oxford Metrics plc. Vicon Bonita™, Vicon Lock+™, Vicon Nexus™, Vicon Sh

ō

gun™, Vicon Tracker™,

Vicon Vantage™, Vicon Vero™ and Vicon Vue™ are trademarks of Oxford Metrics plc.
VESA® is a registered trademark owned by VESA (

www.vesa.org/about-vesa/

).

Portions of the software were initially developed by Lucent Technologies Inc., and are subject to the terms of Lucent Public License Version 1.02 
(

https://opensource.org/licenses/LPL-1.02

). All software distributed under such Agreement is distributed on an "AS IS" basis, WITHOUT 

WARRANTY OF ANY KIND, either express or implied. See the Lucent Public License for the specific language governing all rights, obligations and 
limitations under such Agreement.
Portions of the software developed by Lucent Technologies Inc. are Copyright © 1999–2003. All rights reserved.
Contributor: Vicon Motion Systems Ltd.
Part of the software embedded in this product is eCos (Embedded Configurable Operating System), a registered trademark of eCosCentric 
Limited. eCos is released under a modified version of the GNU General Public License (GPL) (

http://ecos.sourceware.org/license-overview.html

Copyright © 2007 Free Software Foundation, Inc. (

www.fsf.org

).

Other product and company names herein may be the trademarks of their respective owners.
 
 
© Copyright 2015–2021 Vicon Motion Systems Limited. All rights reserved.
Vicon Motion Systems is an Oxford Metrics plc company.
Email: 

[email protected]

 Web: 

www.vicon.com

LOCK+ QUICK START GUIDE

Connect. Integrate. Synchronize.

Summary of Contents for LOCK+









Reviews: