Vehicle Surveillance Camcorder
720P / 360º / 4ch
4 CH DVR / All in one 4CH Vehicle Sur veillance Camcorder
Accessories
Mobile DVR Dimension
Standard Set
(1) Device
(2) Camera
(3) Power cord (black/blue/red)
(4) Alarm cable
(5) IR extension cord
(6) Remote controller
▪
Installation Precautions
1. Make sure power connections clear enough to you before installation.
2. System installation is required professional installers and ventilation space.
3. Please use recommended and genuine storage device.
4. Please contact local dealers in case of service requirement.
▪
In Use Precautions
1. Please keep the inner components off any solid or liquid.
2. Please do not disassemble the equipment for warranty issue. Please contact local
dealers or the manufacturer for prompt service.
3. Please remove the battery if remote control keeps idle for quite a long while.
4. The equipment best connects with ground wire in case of outdoor cameras connection
or alarm I/O connection. This is to keep the DVR away from static electricity damage.
▪
Surrounding
1. Please have the DVR under recommended temperature away from the sun and
heating source.
2. Please keep this equipment away from humid surrounding.
3. Please keep this equipment away from smoke and dust.
4. Please do not drop the equipment.
5. Please keep this equipment in ventilation space.
6. Please supply rated voltage and Amp. To the equipment.
7. Please keep flammable objects away from the equipment.
Vehicle Camera Appearance
Vehicle Camera Installation Diagram
Optional Accessories
(1) USB interface SD card reader.
(2) 4/8/16/32G Class10 above SD card。
(3) GPS Module
(4) USB WIFI
(5) External connect AVM-1250 Vehicle Camera
Safety Precautions
H12AE52001
VVH-MDE52 (Vehicle DVR)
AVM-1276 (Vehicle Cam)
4 LEDs
1 M
DC 12V
View 360°
360°
720P
LENS
7
10
8
9
11
12
13
14
1
2
3
4
5
6
(1). Power Light (2). Recording Light (3). Wifi Light
(4). GPS Light (5). IR receiver (6). SD Card Slot
(7). GPS Connector: For connect with G-Mouse to use GPS function.
The GPS function includes record vehicle location, speed, longitude
and latitude.
(8). EXT: Video output jack, connect with parking assist camera
(9). MIC: Microphone jack, connect and record audio with microphone.
(10). Camera Connector: Connect with dedicated vehicle camera,
which able to record 360°surrounding view.
(11). Alarm Input: Alarm input connector, use by parking assist camera.
(12). Camera Connector: Connect with dedicated vehicle camera, which
able to record 360°surrounding view.
(13). IR Extension Cable Connector: Once upon connecting with the
extension cable, the IR receiver will only receive signal from
extension cable, cannot control by remote controller.
(14). Power Connector: To cooperate with power management function
(in OSD), it can provide delay shut down function.
Power Cable (Black/Blue/Red)
1. Positive Port (Red cable): DC8~32V power input.
2. ACC Control (Blue cable): Can setup delay shut
down recording after turn off engine.
3. Negative Port(Black cable): GND
Alarm Cable(Black/Yellow)
1. Positive 12V ALARM Input (Yellow cable): Connect
with Positive port on parking assist camera.
2. Negative GND(Black cable): GND
1
2
3
5
6
4
1. Lens 1 (Front)
2. Lens 2 (Right)
3. Lens 3 (Inner)
4. Lens 4 (Left)
5. Cable collect slot
6. 3M Double-side tape
1. Install camera on windshield by
adhesive bracket
2. Pick up a best location for
installation.
4. To connect power cable to Mini
USB hole.
3. To adjust a best view angle.
5. To connect the other end with the “Video In” slot in DVR.
(7) Microphone
(8) Velcro strap
(9) Double-side3M tape
(10) Bracket mount
(11) CD
(12) Quick start guide
OPTIONAL
30/25 FPS
720P
DVR
4CH
Extending
