USER MANUAL
E-F291-2 Control Box
NO.
Flash Patterns
1
2
3
4
5
6
7
8
Left & Right Alternating Quad Flash (2 sequences)
Left & Right Alternating Quad Flash, Full Unit Quad Flash (3 sequences)
Full Unit Quad Flash (1 sequence)
Left & Right Alternating Single Flash (2 sequences)
Centre Quad Flash, Left & Right Quad Flash (2 sequences)
Left to Right Sequential Flash to fill the lights (6 sequences)
Right to Left Sequential Flash to fill the light (6 sequences)
Centre Single Flash, Centre to Left & Right Sequential Flash to fill up the light (4 sequences)
For more information, visit our website at: www.unibondlighting.com
Pattern Selection (
8 Flash Patterns
):
Flash pattern selected
to lit up on the control
box indicator only
(light stays off)
OFF
Both the light &
the control box
indicator are lit up
Quick Selection
Right to Left Sequential Flash
(on both the light & the control box indicator)
Left to Right Sequential Flash
(on both the light & the control box indicator)
Push once to select
the next flash pattern
POWER
1. Turn anti-clockwise to loosen terminals
2. Insert positive wire to +
3. Insert ground wire to -
4. Turn clockwise to tighten terminals
To connect the light unit to the control box
1. Turn anti-clockwise to loosen terminals
2. Insert all 11 wires into the slots on
the control box per colour coded
3. Turn clockwise to tighten terminals
FUSE
10A/32VDC
(included)
DASH
ONLY
LIGHT
BAR
FLASH
MODE
CONTROL BOX INDICATOR
+
_
+
_
Installation:
Controls:
For Use with E-2940A/AC, E-2980A/AC & E-2990A/AC
SAE
SAE
