![background image](http://html1.mh-extra.com/html/ultralift/ultralift-phoenix/ultralift-phoenix_wiring-diagram_3478899001.webp)
WIRING DIAGRAM
WIRING DIAGRAM
for
Cabinet Lifts with Manual Swivel
The wiring diagram shown below is the standard wiring arrangement for Ultralift’s
Phoenix and Titan with the
Manual Swivel
.
This should not need to be changed unless swapping to an integrated automation setup using contact closure.
Ports and their uses:
•
AC: 240 V, 50-60 Hz, 200 W
•
A1 & A2: Parallel Controller Ports (Bluetooth, IR, or Dry Contact Closure for automation)
•
1, 2: Actuator/Column
connected
through
the SLS unit
•
Safety Switch: Connected to the SLS unit
Page 1
CBD SLS
ACTUATOR CABLE
SAFETY SWITCH CABLE
POWER CABLE
CBD6S-200W
DPG1C
A1 PORT
ACTUATOR 1 PORT
240V IN
ACTUATOR PORT
SAFETY
SWITCH PORT