Signal processor
MS96 for flow sensors
MS96-11EX0-R/24VDC
Edition
•
2012-10-04T23:35:09+02:00
1 / 2
TURCK Inc.
ñ
3000 Campus Drive Minneapolis, MN 55441-2656
ñ
Phone: 763-553-7300
ñ
Application Support: 1-800-544-7769
ñ
Fax 763-553-0708
ñ
www.turck.com
Type
MS96-11EX0-R/24VDC
Ident-No.
5231407
Ambient temperature
-20…60 °C
Operating voltage
21…28VDC
No-load current I
0
ð
125 mA
Output function
Relay output, changover contact
Device designation
É
II(1) G D [EEx ia] IIC
Protection type
II(1) G D [EEx ia] II C
Ex approval acc. to conformity certificate
TÜV 96 ATEX 1098
Protection class
IP20
Protection class (terminals/housing)
IP20 / IP40
Design
terminal chamber
Dimensions
110x 50x 75 mm
Housing material
Polycarbonate/ABS
Connection
Terminal chamber
Indication: Drop below setpoint
LED red
Indication: Setpoint reached
LED yellow
Indication: Setpoint exceeded
4 x LEDs green
■
ATEX category II (1) G, Ex Zone 0
■
ATEX category II (1) D, Ex Zone 20
■
single-channel signal processor MS96
■
for connection of an intrinsically safe
flow control sensor in zone 0
■
adjustment via potentiometer
■
6 LEDs for display of the flow state
■
intrinsically safe control circuit, [EExia]
IIC
■
switch-off delay adjustable in a range of
0…25 s
■
wire-break monitoring
■
21…28 VDC
■
Changeover contact, relay output
Wiring diagram
Functional principle
Signal processors not only supply insertion
and inline sensors with voltage, they also pro-
cess and display the measured signals. De-
vices with MK96…, MS96… and MC96…
housing styles are available. The individual
housing styles are designed for different oper-
ating voltages and feature various output and
supplementary functions. For intrinsically safe
flow sensors it is required to use signal pro-
cessors with intrinsically safe control circuits
of the series MS96…Ex… and MC96…Ex… .
