background image

 

Copyright 

This publication, including all photographs, illustrations and software, is 

protected under international copyright laws, with all rights reserved. 

Neither this manual, nor any of the material contained herein, may be 
reproduced without the express written consent of the manufacturer. 

 

Disclaimer: 

The manufacturer makes no representations or 

warranties

 with 

respect to the contents hereof and specifically disclaim any implied warranties 
of merchantability or fitness for any particular purpose. The manufacturer is 
not liable for technical and editorial error for this guide. The manufacturer 
reserves the right to revise or make changes to this publication without notice 
or obligation of the manufacturer to notify any person of such revision or 
changes. 

 

Software Licenses 

The software included with the product and referenced in this document is 
furnished under a License Agreement. This Agreement specifies permitted 
and prohibited uses of this product. 

 

Trademarks 

  PMG Quadpad is a registered trademark of Tronic International Pte Ltd in 

Singapore and/or other countries. 

 Microsoft

®

 Windows

®

, Windows logo, Windows

®

 XP, Microsoft

®

 Internet 

Explorer, MS MSN

®

, Outlook, and Microsoft

®

 Office are registered 

trademarks of the Microsoft Corporation in the United States and/or other 
countries. 

  All other product names and registered and/or unregistered trademarks in 

this document are used for identification purposes only and remain the 
exclusive property of their respective owners. 

 

General Guidelines 

  Read all of the instructions carefully. 

  Save the instructions for future use. 

  To ensure follow all warnings and instructions marked in the PMG Quadpad 

documentation and within the PMG Quadpad. 

  Except as explained elsewhere in this manual, do not attempt to service 

the computer yourself. Opening or removing covers might expose you to 
dangerous voltage points or other risks.  Refer all servicing of marked 
components to qualified personnel. 

Summary of Contents for PMG Quadpad










































































Reviews: