background image

Instructions for

Havis Protective Case

For Apple iPad

DS-DA-700-SERIES_OMN_5-15

www.havis.com

1-800-524-9900

DS-DA-701 for iPad 2/3

DS-DA-702 for iPad 4

DS-DA-703 for iPad Air

DS-DA-704 for iPad Air / Air 2

Havis, Inc.

75 Jacksonville Road

Warminster, PA 18974

www.havis.com     1-800-524-9900

FCC Statement / Declaration of Conformity

Specifications

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

Power Supply Input

5V (10 Watt)

Dimensions

11.4” ( 28.9 cm)  W x 8.7” ( 22.1 cm ) D x 0.87” ( 2.2 cm ) H

Weight

0.8 lbs ( 0.36 kg )

Operating Environment

0° C to 35° C  ( 32° F to 95° F )

Storage Environment

-20° C to 45° C  ( -4° F to 113° F )

This device complies with the requirements of the Code of Federal Regulations listed below:

FCC Title 47 CFR, Part 15 Class  foBr a digital device.

Operation is subject to the following two conditions:

(1)  This device may not cause harmful interference, and 

(2)  This device must accept any interference received, including interference that may

       cause undesired operation. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial environment.  This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with instruction manual, may cause harmful interference to radio communications.  Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense.

Related Product

Havis offers a Docking Station specifically for use with the DS-DA-700 

Series Protective Case.  For more information or to order, please visit 

www.havis.com.

DS-APP-102

Docking Station

Docking Station for Apple iPad for in vehicle

computing.

Summary of Contents for DS-DA-700

Page 1: ...ful interference and 2 This device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commerc...

Page 2: ...e Protective Case then insert the other end of the cable into a 5V 10Watt power source 1 Phillips Screwdriver Protective Case Back and Front pieces Micro USB Power Cable 1 4 20 x 3 8 Plastite Screws 12 Rubber Corners Edge 5 Parts Included Tools Required Original Instructions Micro USB into Protective Case USB into 5V 10 Watt Power Source Hand Strap 1 NOTE The Hand Strap comes pre attached to the b...

Page 3: ... Apple iPad from the Havis Protective Case simply remove the twelve screws turn the case over and lift the Front piece of Protective Case off the Back piece Unplug the connector and remove tablet Installation continued 1 Remove Protective Case from packaging and seperate the Back piece from the Front piece 2 Insert the connector from the Protective Case into the Apple iPad ...

Page 4: ...tinued 3 Place the iPad into the Back piece of Protective Case ensuring the connector cable is routed as shown 4 Place the five 5 Rubber Corners Edge onto the Back piece of Protective Case ensuring each one aligned properly or they will not fit securely in place Insert Rubber Edge piece 5 below with short edge along outside edge of Protective Case Some slight warping will be evident if inserted in...

Reviews: