background image

FID / Document identification

 

CTD / Type

 

VS / Release

 

  

1000513 108 

1 / 24

 

CONFIDENTIEL TRIXELL

 

Copyright © 2000-2003-2005 TRIXELL. Tous droits réservés. Ce document et l’information qu’il contient sont la propriété exclusive de 

TRIXELL. Ils ne peuvent être reproduits ou divulgués sous quelque forme que ce soit sans l’accord préalable écrit de TRIXELL. 

TRIXELL PROPRIETARY INFORMATION 

Copyright © 2000-2003-2005 by TRIXELL. All rights reserved. This document and the information contained therein are TRIXELL’s 

exclusive property. Any copy and/or disclosure thereof in any form whatsoever are subject to TRIXELL’s prior written consent. 

 

 

PIXIUM 4600 : Installation, Service, and Users manual 

 

This manual describes the installation procedures and operation of the PIXIUM 4600 digital X-ray detector. 
It also provides information for service and safety operation. It is intended for use by a system integrator. 
Please read this manual carefully before performing any installation or use of a PIXIUM 4600 detector. 

 

 

 

Document history 

 

Index Date Author 

Nature of the modification 

06 / 04 / 00 

J. DUTIN 

Initial document 

05 / 09 / 03 

J. DUTIN 

Laser diode classification (DM 12 074) 
Product evolution (DM 14 425) 

30 / 10 / 03 

P. SALQUE 

Accompanying documents evolution (DM 17029) 

25 / 04 / 05 

C. BOUCHET 

Acclimatization time regularization (DM 21908) 

22 / 07 / 05 

J. DUTIN 

Recycling label (DM 23669) 

22 / 09 / 05 

J. DUTIN 

Removal of CD-ROM (DM 22958) 

G  

 

 

 

 

 

Summary of Contents for Pixium 4600

























Reviews: