background image

www.tridonic.com

1

Subject to change without notice. Information provided without guarantee.

Data sheet 10/20-EM091-6

Emergency lighting units

EM converterLED

Product description

•  Emergency lighting LED Driver with DALI interface 

and automatic test function

•  For self-contained emergency lighting
•  For LED modules with a forward voltage of 10 – 54 V
•  SELV for output voltage < 60 V DC
•  Low profile casing (21 x 30 mm cross-section)
•  For luminaire installation
•  Nominal life-time up to 100,000 h
•  5-year guarantee

Properties

•  Non maintained operation
•  DALI interface for controlled testing and monitoring
•  1, 2 or 3 h rated duration
•  Operating time selectable with plug (duration link)
•  Compatible with most constant current LED Drivers (see 5.4)
•  3-pole technology: 2-pole LED module changeover 

and delayed power switching for the LED Driver

•  Automatic shutdown of output if LED load is out of range
•  Constant power output
•  Addressing function, patented („EZ easy addressing“)
•  Two-colour status display LED
•  Electronic charge system
•  Deep discharge protection
•  Short-circuit-proof battery connection
•  Polarity reversal protection for battery provided by 3-pole 

connector

•  Automatic detection of the connected battery technology  

(NiMH or LiFePO

4

 batteries)

Tests:

•  Status of the battery
•  Status of the LED
•  Function test
•  Duration test

Batteries

•  High-temperature cells
•  NiMH or LiFePO4 batteries
•  LA or 18650 cells

•  4-year design life for NiMH batteries

•  1-year guarantee for NiMH batteries

•  4 – 8 years design life for LiFePO

4

 batteries

•  3-year guarantee for LiFePO

4

 batteries

•  For battery compatibility refer to chapter „Battery selection“

È

Standards

, page 5

Wiring diagrams and installation examples

, page 6

EM converterLED PRO MH/LiFePO4 50 V

PRO series

 

Содержание EM converterLED ST 202 MH/LiFePO4 50V
















Отзывы: