SBTL8033
Single Lane Speed Gate
Installation Guide
PREPARATION
1. Tools: a measuring tape, an adjustable wrench, an im-
pact drill and a small screwdriver (included in the pack-
age).
2. Material: a PVC anti-fire and insulation tube (diameter
≥
25mm), standard three-core power extension wire,
tether cable (random configuration), M12 expansion
screws (included in the package).
3. Thread the connection wire of the device through the
tube before assembly.
4. The power and signal wires should be set separately to
easily distinguish strong and weak power. Please invite
professional personnel to complete the wiring. The de-
vice must be connected to the ground.
Below is the outline and dimensions:
INSTALLATION
1. Prepare the tools for product installation and sort out
the auxiliaries according to the packing list.
2. Drill holes after determining the hole positions based on
the mounting template as shown in below. Insert the ex-
pansion bolt into the holes accordingly.
3. Tighten the nut preliminarily, then connect the master
and slave devices with wires.
w w w . t i m e t e c c l o u d . c o m
