9 Snap bottom hinges on until
you hear an audible “click”.
8 Slide thumbs down faceplate, purging air from inside case
and establishing flush contact between protective film and
phone screen.
6 Snap bottom corner of the
faceplate onto the main case
body until you hear an audible
“click”. Repeat on other corner.
INSTRUCTIONS
2 Inspect underside of faceplate
and remove any debris.
1 Thoroughly clean your phone
screen with microfiber cloth,
removing all dust and fingerprints.
INSTALLATION
3 Slide phone into case bottom
end first, maintaining alignment
of foam pad.
4 Use thumbs to snap opposite
side of phone into case.
Thule.com/ThuleAtmosX5installation
OPTIONAL
5 Find 3 notches along underside of faceplate. Align notches
along top edge of case. Press down to engage notches
with case.
10 Ensure all edges are flush.
Thread the lanyard through holes on
botton right corner. Loop back through
and pull tight.
7 Snap side hinge on until you
hear an audible “click”.
Repeat on other side.
1
2
3
1
