1
2
3
Getting started with ThermaRay's
Comfort Controller is as easy as... 1,2,3.
Press CANCEL/OCC to put Comfort
Control in manual mode.
Verify that the green light is on
indicating manual mode.
Choose the desired room temperature
using the Up or Down arrows. Press
ENTER/MENU to save the change. You
can change this temperature at any
time.
Notes:
o
Your Floor System is calling for heat when a
Down
arrow is displayed.
o Your System will turn ON when the temperature difference between the comfort settings and the floor or
room temperature is more than 2° Fahrenheit (1°C).
APPLIES TO MODELS SR240/120 FLOOR
Summary of Contents for SR120
Page 2: ......
