background image

 

                                                                 

TCL-IP (8) User Manual

 

TCL communication

                                     

                          www.tclcomm.cn

 

1

 

Chapter 1 Product Introduction 

 

1.1 Summary of the phone 

This unit is the latest generation VoIP terminal product applied to the 
IP network for voice communication. The heaviest Characteristic of 
IP phone is that what transports voice over network at an extremely 
low cost with excellent sound quality. 
 

1.2 Characteristic and compatibility 

 

Supports 2 10/100M Ethernet ports

one for WLAN,the other 

for LAN

 

 

Dynamic voice test

Comfortable noise generation

Dynamic 

voice jitter buffer 

 

Complies with G.168 16ms echo cancellation 

 

Tone generation and local DTMF re-generation according to 
ITU-T 

 

Supports E.164 dial plan 

 

Supports router function

BRIDGE or NAT mode optional 

 

Supports DHCP protocol 

 

Supports PPPOE protocol

ADSL

Cable Modem accessing 

environment

 

 

Stores 100 entries phone number 

 

10 entries for each missed call, incoming call and dialed number 

 

16 rings are optional 

 

Time display function 

 

Adjustable volume for both handset receiver

hand free speaker 

and incoming ring 

Summary of Contents for IP phone






















Reviews: