Task Force Tips G-Force Series Instructions For Safe Operation And Maintenance Download

Page: 1 / 28

©Copyright Task Force Tips LLC 2011-2018

LIG-010 May 29, 2018 Rev05

MANUAL: Fixed, Selectable,

and Automatic Nozzles

North American Models

INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE

WARNING

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/

serial-number

This Instruction Manual is intended to familiarize firefighters and maintenance personnel with the operation, servicing, and safety

procedures associated with the G-Force nozzle.
This manual should be kept available to all operating and maintenance personnel.

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

G-Force

with Lever Handle

G-Force

Tip Only With Ball Valve

and Lever Handle

G-Force

with Lever Handle

and Pistol Grip

G-Force

with IMPULSE Trigger

Valve System

by:

Summary of Contents for G-Force Series





























Search results

Summary of Contents for G-Force Series

Reviews:

Related manuals for G-Force Series

Brands by name

Popular brands

Task Force Tips G-Force Series, Instructions For Safe Operation And Maintenance

Search results

Summary of Contents for G-Force Series

Reviews:

Related manuals for G-Force Series

Brands by name

Popular brands