TANDBERG 1000 MXP User Manual Download

Page: 1 / 52

MXP Series Video Endpoints

User Guide

D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.

MXP Series Video Endpoints

User Guide

Thank you for choosing TANDBERG!
TANDBERG video conferencing offers the

natural communication experience of a

face-to–face meeting in ways that other

technologies cannot.
Your TANDBERG MXP video endpoint has

been designed to give you many years of

safe, reliable operation.
This user guide has been divided into

several chapters, all of which provide

different information. You can access the

chapters directly by clicking on the menu

bar at the top of this page.
You will find that some places information

has been copied from other chapters (but

adapted, when needed) to let you have all

the relevant information there and then.

This helps eliminating the need to read

through long sections before you can even

think of getting started.

Software version F8.x
May 2011

www.cisco.com

Summary of Contents for 1000 MXP





















































Search results

Summary of Contents for 1000 MXP

Reviews:

Related manuals for 1000 MXP

Brands by name

Popular brands

TANDBERG 1000 MXP, User Manual

Search results

Summary of Contents for 1000 MXP

Reviews:

Related manuals for 1000 MXP

Brands by name

Popular brands