TACSWAN 85-028 Quick Start Manual Download

Page: 1 / 2

QUICK START GUIDE

P/N 85-028 | 85-029

CS CAMERA FILTER SYSTEM &

CS CAMERA PHOTOGRAPHY SYSTEMS

QUICKLY MOUNT A VARIETY OF FILTERS ONTO CAMERA
LENSES UP TO 82 MM

MOUNTING CAMERA LENS

ADAPTOR TO CAMERA

1. Pull the spring-loaded grip ring until it's wide

enough to fit over desired camera lens.

2. Release the spring-loaded grip ring so that

it's securely attached to camera lens.

PUTTING FILTER INTO FILTER

HOLDER

1. Slide 4 in / 100 mm filter of choice into

the slot of the filter holder. Use care when

sliding filter into holder to avoid damage to

the filter.

2. Repeat with a different filter on separate

filter holder if desired.

ATTACHED FILTER HOLDER TO

CAMERA LENS ADAPTOR

1. Note the four spring-loaded tabs on

mounting side of filter holder.

2. Press the filter holder firmly onto the

raised grooved ring of the camera lens

adaptor until it clicks in place. Be sure it

is firmly attached prior to use to avoid

damage to filter.

3. NOTE: you can stack additional filter

holders on top of one another by

repeating step 2 above.

Summary of Contents for 85-028

Page 1: ...FIL TER INTO FILTER HOLDER 1 Slide 4 in 100 mm filter of choice into the slot of the filter holder Use care when sliding filter into holder to avoid damage to the filter 2 Repeat with a different fil...

Page 2: ...ginal Purchaser and the product that you purchased is not covered by this warranty This warranty is VOID if this Product has been altered or modified in any way including but not limited to attempted...