Page 1
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture more
than one body style of the same model. To assure your part is correct; our tech
department can be contacted at [email protected] to verify fitment and assist with
technical questions. All other inquires can be directed to [email protected]. In the
event you do not have internet access please call 1-800-287-5900.
STEP 1
1) Turn off engine and chalk tires with
stop block.
Open Hood. Disconnect Battery.
STEP 2
2) Begin by removing
all of the hardware that
secures the factory
grille to the vehicle
core support.
There should be the (3)
10 MM bolts across the
top near the front grille
shell.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL.
FRONT BUMPER REMOVAL
PRO TIP:
Before you begin, use “3M Painters Tape” to
apply a protective guard around the work areas.
Attend to the fender and bumper valance. This will
help protect the paint and finish of your vehicle.
FIG 1
(1) Upper Class Grille - Main
Full Opening - Polished - Part #54127 OR
1 Bar - Polished - Part #54131 OR
2 Bar - Polished - Part #54133 OR
Full Opening - Black - Part #51127 OR
1 Bar - Black - Part #51131 OR
2 Bar - Black - Part #51133 OR
(1) - Large Bottom Mounting Plate
(6) - #10 Screws
(6) - #10 Flat Nuts
(6) - Flat Washers
(6) - 10/32 Nylon Lock Nuts
(7) - Trim Panel Retainer Clips
- Drill
- 1/8” Drill Bit
- Screwdriver set (Phillips)
- Needle Nose Pliers
- Socket Set
- Ratchet Tool
- 1/2” Plastic Spatula
Tools Required
Hardware included
Parts included
GRILLE REMOVAL & Grille Installation Guide
Upper Class Grille
Main grille INSERT - #54127 / #54131 / #54133 / #51127 / #51131 / 51133
2016-2017 ChevroleT SIlverado 1500
