Landscape Rack Installation Instructions
MTG-LSR-42-__ & MTG-LSR-52-__
Thank you for purchasing the SunEarth Landscape Rack. The use of all stainless steel hardware and 6063-T6 structural aluminum
makes the SunEarth Landscape Rack a simple, strong, and durable solution for your landscape or sawtooth racking needs.
Package Contents:
2 EA Support Strut 42” or 52” Length, (Black Anodized pictured)
2 EA Rear Leg, 2” x 2” C Channel
2 EA Front Foot, 2” x 2” C-Channel, 4” Length
2 EA Rear Foot, 1 1/2” C-Channel, 4” Length
4 EA C-SSN (collector clip, 3/8” x 1” stainless steel bolt, 2 x washers, 1 x lock washer, 1 x nut)
6 EA Bolt Assembly (5/16” x 2 1/2” stainless steel bolt, 2 x washers, 1 x lock washer, and 1 x nut)
Suggested Installation Steps
Determine Front Feet positions and securely fasten Front Feet to mounting surface using
an acceptable fastening method for the mounting surface and your local conditions.
Insert Support Strut into Front Foot, insert bolt, and tighten nut. Make sure not to over
tighten. SunEarth recommends tightening the nut approximately
1/2
turn past the setting of
the lock washer or torque of 12ft lbs. Repeat for remaining Support Strut.
Step 1
Step 2
www.sunearthinc.com
1
2
3
4
5
6
1
2
3
4
5
6
3
