Keithley Instruments
28775 Aurora Road
Cleveland, Ohio 44139
1-800-935-5595
Model 4288-10 Rear Support Rack-Mount Kit
Assembly and Mounting Instructions
PA-953 Rev. E / July 2018
*PPA-953E*
1
Introduction
The Model 4288-10 Rear Support Mount Kit is a rack mount kit that is intended for use with the
Model 3706A System Switch/Multimeter in a standard 19-inch equipment rack.
Keithley Instruments recommends that you support the rear of the Model 3706A in all installations.
This kit includes the hardware that you need to provide this support for one Model 3706A.
This kit should be used in addition to the rack mount hardware that is supplied with the Model 3706A.
The supplied kit provides support for the front of the instrument. The Model 4288-10 provides the support
for the rear.
The Model 4288-10 Rear Support Mount Kit is intended for use in fixed installations only. It is
not intended for mobile applications or any other application where the rack mount and
mounted instruments are subject to vibration or shock.
Tools required
Medium (#2) Phillips-head screwdriver
Parts list
The table below lists the hardware that is supplied with this kit.
Item description
Part number
Quantity
Rear support bracket
3706-354
2
Support bracket
3706-355
1
Retaining clip (with captive nut)
FA-148
4
10-32 × 5/8 in. Phillips truss-head screw
10-32X5/8PHTRHD
4
8-32 × 3/8 in. Phillips truss-head screw
8-32X3/8PHTRHD
12
8 × 3/4 washer
8FENWA
12
