Form No. 1000031
C13-HHC SERIES
Operating Instructions
and Parts List for:
Tech. Services: (800) 477-8326
Fax: (800) 765-8326
Order Entry: (800) 541-1418
Fax: (800) 288-7031
SPX Corporation
5885 11th Street
Rockford, IL 61109-3699 USA
Internet Address:
http://www.powerteam.com
®
Litho in USA
INTRODUCTION
The 13-HHC-B Hydraulic Cutter Remote is a lightweight,
compact and extremely durable tool that has been designed
for cutting a wide variety of materials.
The Cutter features insert type blades that can be easily
replaced in the field with the use of only a screw driver.
Other features include a hinged “ Flip Top” Head and a full
360 Degrees of head rotation.
The Cutter can be operated with any suitable hand or power
pump capable of pressure output of 10,000 PSI. No special
control valves are required since the cutter piston is spring
returned.
The 13-HHC is not to be used for hot line work.
SPECIFICATIONS
PUMP SECTION:
Injector Stroke:
.56 in. (1.42 cm)
L P Output Per Stroke:
.441 cu. in. (.007 liter)
H P Output Per Stroke:
.034 cu. in. (.0005 liter)
L P Unloading Valve Setting:
500 psi (3,447 kPA)
L P Relief Valve Setting:
25 psi (172 kPA)
H P Relief Valve Setting:
10,000 psi (68,950 kPA)
Handle Effort:
4.2 lbs. per 1,000 psi
(1.90 kg per 6,895 kPA)
Reservoir Capacity:
8.5 cu. in. (.139 liter)
Oil Type Recommended:
Amoco Rykon MV
TOOL SECTION:
Bore Diameter:
1.875 in. (4.76 cm)
Stroke:
2.180 in. (5.54 cm)
Cutting Force:
13.180 tons U.S.
(12.5 tons Metric
Head Rotation:
360 degrees continuous
GENERAL:
Total Weight:
20.1 lbs. (9.1 kg)
Size:
4.15 x 7.39 x 25.66 in.
long (10.54 x 18.77 x
65.17 cm long)
CUTTING CAPACITY:
(See Notes)
Wire Rope:
1 in. (2.54 cm)
Soft Copper/Alum Wire:
1.25 in. (3.17 cm)
Gr. 2 Soft Steel Bolts:
.875 in. (2.22 cm)
Bare Stranded Copper/ Alum Wire: 2.00 in. (5.08 cm)
ACSR Underground Power Cable: 2.00 in. (5.08 cm)
Stranded Galvanized Wire:
.75 in. (1.90 cm)
WARNING
Notes:
Size shown are for stranded bare wires. When
cutting insulated wire, size is over insulation.
Rating for soft steel should not exceed ASTM
1022. Rating for hard drawn steel wire should not
exceed ASTM 1042.
13-HHC-B
HYDRAULIC CUTTER TOOL
Sheet No.
1 of 7
Rev
Date: 12 Feb 2004
