What’s in the box*:
Quick Reference Guide
M4240
Ethernet Cable **
(supplied with AP110
and AP210)
Power Supply/s
(1 or 2 depending upon
product configuration)
M4240 Handset
(New terminals include
a pre-fitted battery)
D4200 Charging Dock
(supplied as standard with some
product configurations only; for
charging the handset and pairing the
Handset with its Access Point)
Pairing cable
(has two small transparent
connectors at each end)
OR
OR
OR
AP210 Access Point
(not depicted, supplied
with M4240 Dual
Communications variant)
22048-05
Page
1
Document pack
Power
indicator
light
POWER
port
SERIAL
port
NET port
(for network
connection)
LINE port
(for telephone
connection
Drop
paper
roll
Pull
paper
roll
UK Telephone Cable
(supplied with AP100 or AP210)
ROI Telephone Cable
(supplied with AP100 or AP210)
*Box contents may vary for replacement/swaps, **Ethernet cables are optional depending upon terminal model and order configuration
1. Connect the Access Point:
2. Connect Power Supply & Charging Dock
3. Insert a paper roll:
4. Turn on the handset:
Useful tips:
• For optimum Bluetooth wireless range, minimise obstructions by
positioning the Access Point where it is in line of sight to where you will
be using the handset. Position on a wall using the fixing screws provided
for optimum Bluetooth coverage.
• Ensure your firewall settings are set to allow the terminal to send and
receive data over your network.
• Connect Ethernet and/or telephone cables as
required between the access point and wall
sockets. For AP210, you can use either or both
connections, but some configurations are
restricted to dial only (in in doubt call helpdesk).
• Connect one of the power supplies to the red
POWER
port and to a plug socket.
Check that the green power indicator is
illuminated and that the Access Point beeps
twice
.
• Connect one end of the pairing cable to
the
green
SERIAL port and leave in place.
This is recommended for ease of location
when troubleshooting.
• Drop the paper roll into the holder
with the paper feeding from
underneath
the roll.
• Pull a short length of the paper over
the screen.
• Shut the Printer Cover over the paper
until you hear it ‘click’.
• Pull and tear the paper over the serrated
edge as shown.
•
Hold down
the
blue
FUNCTION button.
• Let go when the terminal ‘beeps’.
After a few seconds the screen will show the desktop
with icons and then the SALE / REFUND (Idle) Screen.
The terminal will automatically connect to bank systems
to logon as required.
Updates
Once a month, your terminal will connect to Spire systems to download
any new software and/or important changes*. This update will typically
occur during the night. For this reason, Spire suggests you leave your
terminal powered on and placed on the Charging Dock or directly to the
Power Supply at all times. In the event of it being switched off when the
update tried to take place, your terminal will notify you to leave its power
on for another update attempt the following night.
* For Dial-Up products: In the UK, calls for updates will be charged at £0.10 per minute from a BT
landline. In ROI, calls will be charged at €0.065 per minute from an Eircom landline.
The charges for other networks may vary. Prices correct at the time of printing.he charges for other
networks may vary. Prices correct at the time of printing.
• Remove the battery from the terminal by
pressing in the release clip and pulling out the
battery. Remove and discard the protection film
across the contacts. Replace the battery ensuring
that it is firmly in place and flush with the
terminal body.
• If Charging Dock supplied, connect a power
supply to the
red
POWER port under the
Charging Dock and to a mains wall socket.
• Place the handset carefully on the Charging Dock.
• If Charging Dock is not supplied, connect
the power supply direct to the terminal.
The charging light should light up
red
to indicate that the battery is charging. Please
allow the battery to fully charge before taking it
off the dock/supply (this may take 2 to 4 hours).
• Using your fingers, pinch the sides of
the Printer Cover and pull up firmly.
If this is a new terminal, remove the roll from
the holder and remove an outer packaging
that may be present.
Please turn over to continue...
DO NOT TURN ON HANDSET UNTIL INSTRUCTED
AP110 Access Point
(supplied with M4240 Network variant)
AP100 Access Point
(supplied with M4240 Dial-Up variant)
MID Entry:
Your terminal may prompt for you to enter your MID as a security check.
Replacements/swaps:
If you are receiving a replacement handset or Access Point, the two items will need to have
their Bluetooth configured so that they can “talk” to each other before you attempt the
download. Please refer to the User Manual or call the helpdesk for assistance.
DHCP:
(relevant if you are using a network connection)
Your terminal will be pre-configured for use on standard networks featuring DHCP (automatic
allocation of IP addresses). In the unlikely event that your network does not have this feature,
please call the helpdesk for assistance.
RED
= charging
GREEN
= Fully charged
POWER
port
SERIAL
port
