The
CHRONIS IB
is a timer and manual control for IB BUS line.
The main function of the
CHRONIS IB
is "to give controls according to the time".
In that way, one “UP” and one “DOWN” control per day can be programmed.
❏
Weekly timer :
different times can be programmed for every day of the week.
❏
Cosmic function :
the time of the automatic up and down controls are determined according to the season.
❏
SEC function :
Thanks to a specific working mode (chosen by the end user), Chronis gives the impression
that a house is inhabited (automatic controls are sent within a window of +/- 15 minutes
around the programmed times).
®
inteo
CHRONIS IB
INSTALLATION
guide
Ref.182253A
1
Installation:
2
80 mm
80 mm
Characteristics:
33 mm 17 mm
Cabling :
A
The CHRONIS IB is compatible with the SOMFY “IB” BUS line (common = +V). Cabling arrangements are
shown in the diagram below. Respect the electrical standards in force as well as the following points:
- disconnect the mains before carrying out any work.
- ensure that no forces act on the screw terminals after installation.
- Do not forget to mount the protection cover to separate the cables
for the BUS line and the cables for the power.
❏
Main supply : 220-240V 50Hz.
❏
Class II product
❏
Protection index IP40.
❏
Output : dry contacts 3A.
❏
Output temporisation : active for 0,5s.
❏
Environmental conditions for use :
- tempe5°C to +40°C (no condensation allowed).
- pollution degree typical for usual living space.
❏
Time accuracy : +/- 5 minutes a year.
❏
Power failure :
date and time are stored up to 10 days. The
memorized open and closing time are not erased by a power failure.
EN60730-1
EN50081-1
EN50082-1
Installation allowed only by authorized electrician.
Before connecting the unit, read the instructions carefully.
