background image

Features

RTL-TH DIGITAL

Regulation Box

Room temperature regulation

Return flow temperature limitation

10 - 50 °C

Room temperature controller

Ventilation

Flowmeter

Electro-thermal actuator

“easy-connect” plug-in connection

2. Area of Application

Heating systems

For combined radiator-surface heatings the RTL-TH 

DIGITAL Regulation Box is used for the 

room tempe-

rature-dependent regulation

 of the surface heating 

while limiting the return flow temperature

.

3. Technical Description

The 

regulation box

 consists of a wall insulation

box with a pre-mounted valve module, an electro-

thermal actuator, a protective cap, an air vent plug, 

a flowmeter for measuring and regulating the volu-

me flow and a wall cover.

The 

valve module

 is provided with a 3/4“ male

thread (Euro taper) for a connection via Simplex

compression adapter on the pipe side.

The valve is comfortable activated with the 

room 

temperature controller 

RTL-TH DIGITAL.

 

This programmable temperature controller allows 

programming switching events (up to 9 per day) and 

temperatures according to personal needs. After 

installation the device automatically shows the time 

of day and the room temperature.

In 

AUTO

 mode, the heater will be automatically acti-

vated according to programmed time and tempera-

ture. Program 1 is the default pre-set program (see 8. 

room temperature controller).

Room temperature will be regulated based on the 

Work on heating systems must only be done by qualified

professional personnel and in accordance with the 

respective applicable regulations, guidelines and rules of 

engineering.

Refer in particular to: 

DIN EN 1264: 

Surface integrated heating and cooling 

systems

DIN EN 12828: 

Heating systems in buildings 

DIN 18 380: 

Heating systems and central hot water

heating systems

VDE 0100: 

Creating low voltage systems

VDI 2035: 

Scale formation in domestic water heating 

systems and water heating systems

BGV: 

German Professional Association Regulations

(accident prevention regulations)

DIN = The German Institute for Standardisation

EN = European Standards

VDE = German Association for Electrical, Electronic &  

Information Technologies

VDI = Association of German Engineers

Installation and Operating Instructions

RTL-TH DIGITAL

Regulation Box

EN

1. Features

Summary of Contents for RTL-TH DIGITAL













Reviews: